(9)
stop weight (h, fig. 2). the weight, attached by means of a clip to the
stop cord, in dropping actuates the stop motion.
9 停止重量,圖2。在下降過程中,通過夾子連接到停止線上的重量驅動停止運動。
(10) slide door control
(i,大45°法織物阻燃性能測試儀廠家, fig. 2). this knob moves the c---h mechanism used to hold the sliding
door in an open ition for insertion of test specimen racks.
lfy-602a大45°法織物阻燃性能測試儀
主要用途
2利用其內部循環掃描的工作方式,對整個燃燒過程進行---控制測量。
3、分辨率:0.01s
7、試樣架:使其傾斜為45°角,
10、標志線:白色棉絲光縫紉線11.7tex×3,符合gb/t6836的要求。
12、火焰高度:16mm
14、刷毛裝置:符合gb/t 14644-2014 5.2條款要求
15、箱內溫度顯示:室溫~99℃
16、燃燒氣體:---化學純。
lfy-602a大45°法織物阻燃性能測試儀
主要用途
a法用于紡織品及其他材料在45°狀態下燃燒時其損毀面積和損毀長度的測定,b法用于測定紡織品在45°狀態下接受熱熔融至規定長度時接觸火焰的次數。
pulley/eye (g 5 , fig. 2). the pulley/eye is the support
and guide for the stop cord. other guides are specifically identified as the skyhook (g1 ),
the l-shaped guides (g2, g3)&a pigtail guide (g6).see
§1610.61(c)(1) for a clarification of the stop cord ition.
8 滑輪或環眼g 5,圖2。滑輪或眼是停止線的支撐和引導
g其他導軌被明確標識為天鉤g1、l形導軌g2、g3和尾光纖導軌g6。有關停止線位置的說明,請參見§1610.61c1。