sbms/sbms-e - 從模塊
每個單獨的從模塊均可以連接單個傳感器。它由內部總線連接由主模塊提供供電,并觸發兩個固態繼電器的換向:基于傳感器輸出的常開觸點和常閉觸點。兩個選擇器可用于配置傳感器信號輸出pnp/2線或npn和邏輯正向或反向。海綿吸具廠家。該模塊還有兩個用于診斷的led指示燈。海綿吸具價格。
each individual slave module enables the connection of a singlesensor.
it is powered from the internal bus connection (provided by themaster module)&triggers the commutation of two solid staterelays: a no contact&a nc contact based on sensor output.
two selectors are available to conffgure sensor signal output(pnp/2 wires/npn)&logic (direct/reverse).the module also has two led indicators for diagnostics.
自動校準中心氣動針狀夾具 pt
? 4根pt25或者8根(pt28)直徑2mm的針。
? 適合塑料、紡織或食品工業。海綿吸具廠商。
? 雙動作。
? 瞬時調整針行程 (1)。
? 多個安裝附件 (2)。
? pt25: 大通孔 (3)。
? pt28: 用于清潔和釋放的排放口 (t)。舟山海綿吸具。
? pt28: 用于接觸熱表面的ptfe 墊 (4) 。
? pt28: 選裝磁性傳感器 (5)。
self-ccting pneumatic needle gripper series pt
? 4 needles (pt25)/8 needles (pt28) with 2mm diameter.
? suitable for p1astics, textile&food industry.
? double acting.
? needle simultaneous stroke adjustment (1).
? several mounting accessories (2).
? pt25: large through hole (3).
? pt28: blow-off port (t) for cleaning&releasing.
? pt28: pad in ptfe (4) for hot surface contact.
? pt28: optional -ic sensors (5).
真空泵 / ej-bsvlg
ej-bsvlg-large-iso
? 非常適合集中或分散應用
? 吸氣流速和壓縮空氣消耗量之間比率-
? 可提供開/關真空閥、吹氣和集成式手動超控
? 準備安裝用的 pom 歧管iso 15407-118 毫米閥門類型 2x 3/2 常閉或 5/3 帶閉中心
? 提供雙級和三級 ej-large 盒ej-hf 和 ej-hv
? 額外真空端口可用于安裝真空開關
? 在線設計,實現更-的耐塵性能
? 可按順序安裝
典型應用
? 盒子包裝和紙箱機
? 用于需要集成控制系統且要降低重量、尺寸緊湊的應用電子行業
? 處理沉重和多孔表面物體