夾具訂制
agg可在機械手和模具間提供精i準的中心。
注塑模具內金屬嵌件安放時尤其要注意這一點。
夾具agg...b 安裝在eoat上,鋼管 agg...c 安裝在模具上。
一旦機械手向模具靠近,夾具在壓力的作用下逐步向鋼管靠近,
并與之接觸。
agg21-b 和 agg30-b 采用的是雙動作安全彈簧,機械手吸盤,-在壓縮空
氣 (nc)缺失時設備的正常運行。
agg19-b 采用的是單動作復位彈簧(no)。
gripper for engagement
the agg is used to provide a precise ccting between the robot
and the mould.
this necessary when metal inserts must be p1aced in the
mould, before the p1astic injection.
the gripper agg…-b is fitted on the eoat,吸盤批發, while the steel bushing
agg…-c is fitted on the mould.
once the robot has approached the mould,香港-行政吸盤, the gripper is
pressurized, thus it closes&engages the bushing.
agg21-b&agg30-b are double-acting with a safety spring to
keep the gripper engaged even without compressed air (nc).
agg19-b is single-acting with reset spring (no).
真空泵 / ej-line
ej-line-medium
? 可以集成在夾持點附近,輕
? 可夾式串聯設計優化整體尺寸
? 吸氣流速沒有降低
? 靈活,能夠使用串聯或彎式接頭
? 響應時間快,能源效率i高
? g1/4 真空端口
? 提供雙級 ej-medium 盒ej-lp, ej-hf, ej-hv)
有關不同壓力下的吸氣流速和空氣消耗量的技術規格,請參閱雙級和三級版本的 ej-medium 盒筒的技術數據表
典型應用
? 塑料成型自動化設備
? 金屬片或金屬板搬運激光切割、彎曲和沖孔機器
? 拾取和放置貼標機
吸盤/符合 fda 標準的硅氧烷
vg.fo33f 扁平吸盤,采用符合 fda 標準的硅氧烷材質制造,帶有加強件和薄唇口
? 適用于打開袋子和處理薄而精致的物品,例如板和薄膜
? 內部紋理和薄唇口可防止損壞處理的物品,同時保持其平整度
? 吸盤由 fda 批準的透明硅氧烷制成
技術數據
材料sil 50 fda
在不同真空度下與表面垂直的提升力 [n]-20 kpa -60 kpa -90 kpa16.2 38.3 49.2
在不同真空度下與表面平行的提升力 [n]-20 kpa -60 kpa -90 kpa 13 30 39
體積 2.1 [cm3]
zui小曲線半徑 35
zui大垂直移動距離1.5
吸盤5