池州PVDF/5000/HG蝸輪

東莞市千泰塑膠原料有限公司為您提供池州pvdf/5000/hg蝸輪。池州pvdf/5000/hg蝸輪
pc/pbt alloy
pc/pbt alloy, pbt has excellent mechanical properties, chemical corrosion resistance&easy molding. the blending of pbt&pc can improve pc fluidity, improve processability&chemical resistance. because pbt is a crystalline polymer, it is easy to phase separation when mixed with pc,&its interfa-l adhesion is not good, so its impact toughness is not ideal. a certain amount of elastomers is usually added to improve the impact strength of the blends. the zinc salts of thermoplastic elastomer ethylene / methacrylate copolymers play a role in compatibilization&toughening of pc/pbt blends. the addition of some nucleating agent can improve the crystallinity of the blends; adding a small amount of low pressure polyethylene in pc/pbt blend system, can improve the flowability of the blend, play a toughening effect on blends,&can improve the appearance of alloy; added in pc/pbt ethylene / vinyl acetate copolymer can further enhance the compatibility&improve impact resistance strength; esterification reaction between pc&pbt, can improve the compatibility, japanese researchers using pc&pbt in the presence of a transesterification catalyst, prepared pc/pbt blends, good comprehensive performance, but also has better transparency;&pc with similar refractive index of glass fiber reinforced pc/pbt, not only the excellent comprehensive performance system.&good transparency, can do instead of glass materials. foreign pc/pbt alloy products are mainly used for automobile bumpers, packaging film materials, car base&seat, etc.
pet pet has good mechanical properties&chemical resistance. pc/pet has both the rigidity&heat resistance of pc,&the solvent resistance of pet. moreover, the addition of pet can improve the processing fluidity of pc. domestic researchers found that when the pc/pet ratio is 1/3, the interface layer forms between the two phases,&the pc/pet compatibility is best at this time. in addition pc&pet ester exchange reaction is one of the best ways in which the catalyst compatibility, selection of a very large impact on the reaction, the catalyst of lanthanide catalyst&the traditional study found (such as titanium) have higher catalytic activity,&there is no side effects, also found that the ester exchange reaction occurs mainly in the interface. in pc/pet blends, the toughness&impact strength of the alloy can be improved by adding elastomer, such as butyl acrylate.
the research&development of pc alloy change rapidly, there are a variety of pc alloy has been developed&marketed, espe-lly pc modified polyester blends, such as pet/pcl (multiblock copolyesters by ethylene glycol, a low molecular weight polycaprolactone&terephthalic acid copolymer made) blended with pc modification; by 1, modified polyester pc blended with 4 - cyclohexane two methanol, ethylene glycol&terephthalic acid, can significantly improve the pc flexural modulus&tensile strength; polycaprolactone with glass fiber as reinforcing material, promote the pcl&pc were mixed with modified transesterification catalyst, transparent material can get good processing performance, high rigidity; poly (1, 4 - two - 1 4 cyclohexane carboxylic acid, cyclohexane two methanol) ester modified pc, pc can significantly improve the transparency&yellowing resistance, can be used as optical materials; liquid crystal polyester modified pc it can be used to improve the melting&mechanical properties of pc.
injection molding process
pc model
thousands of thai plastic professional sales. makrolon 1092 pc bayer materialscience llc (gen kos)
thousands of thai plastic professional sales. makrolon 1095 pc bayer materialscience ag (gen kos)
thousands of thai plastic professional sales. makrolon 1143 pc bayer materialscience ag (gen kos)
thousands of thai plastic professional sales. makrolon 1239 pc bayer materialscience ag (gen kos)
thousands of thai plastic professional sales. makrolon 1243 pc bayer materialscience ag (gen kos)
thousands of thai plastic professional sales. makrolon 1248 pc bayer materialscience ag (gen kos)
thousands of thai plastic professional sales. makrolon 1260 pc bayer materialscience ag (gen kos)
thousands of thai plastic professional sales. makrolon 1804 pc bayer materialscience llc (gen kos)
thousands of thai plastic professional sales. makrolon 1837 pc bayer materialscience ag (gen kos)
thousands of thai plastic professional sales. makrolon 1844 pc bayer materialscience ag (gen kos)
thousands of thai plastic professional sales. makrolon 1899 pc bayer materialscience ag (gen kos)
thousands of thai plastic professional sales. makrolon 1954 pc bayer materialscience ag (gen kos)
thousands of thai plastic professional sales. makrolon 2205 pc bayer materialscience ag (gen kos)
thousands of thai plastic professional sales. makrolon 2207 pc bayer materialscience ag (gen kos)
thousands of thai plastic professional sales. makrolon 2256 pc bayer materialscience ag (gen kos)
thousands of thai plastic professional sales. makrolon 2258 pc bayer materialscience ag (gen kos)
thousands of thai plastic professional sales. makrolon 2400 pc bayer materialscience llc (gen kos)
thousands of thai plastic professional sales. makrolon 2403 pc bayer materialscience llc (gen kos)
thousands of thai plastic professional sales. makrolon 2405 pc bayer materialscience ag (gen kos)
thousands of thai plastic professional sales. makrolon 2407 pc bayer materialscience ag (gen kos)
thousands of thai plastic professional sales. makrolon 2456 pc bayer materialscience ag (gen kos)
thousands of thai plastic professional sales. makrolon 2458 pc bayer materialscience ag (gen kos)
one of the laws;
use: widely used in transparent building plates, electronic appliances, optical discs, automobile industry, machinery, optics, medicine&other fields.
physical properties&processing of pc plastics
the low temperature -45 degree polycarbonate is colorless&transparent, heat resistant, impact resistance,&flame retardant bi class,&has excellent mechanical function in the common use temperature.
density: 1.201.22g/cm3
linear expansion rate: 3.8 * 10 cm/cm degrees c
melt flow rate (330 degree c/2.16 kg)
mold temperature injection pressure: 50~80, 80~130, process preheating temperature 110~120 parameter time /h barrel
23 c, 24 hr 0.20%
saturation, 23 degree c 0.40%
saturation 0.40%
balance 0.20%
     聯系時請說明是在云商網上看到的此信息，謝謝！
     聯系電話：0769-33214396，15818465693，歡迎您的來電咨詢！
     本頁網址：http://www.hkjzdrp.cn/g12176948/
     推薦關鍵詞： eva, eea, eba, pc, eea